-
Re: jockey wheels on the AL-KO frames
If you loosen the red clamp lever several turns the entire assembly should be loose. The crank with the outer tube should lift out the top or push out the bottom as you crank the wheel tube up inside…2 -
Re: 2006 T@B Clamshell - Cylinder for lock system was drilled out, can't find a replacement
Many parts for the Dutchman built T@Bs are available from UK based "caravan" dealers. The T@B and Tabbert brand have long been popular in Europe and parts are widely available. When T@Bs fi…1 -
Re: jockey wheels on the AL-KO frames
Hi, You need to support the tongue (it looks like it is on a jack stand) so no weight is on the jockey wheel, Then, loosen the side clamp so the entire assembly is loose. Now you should be able to cr…1 -
Re: I can't find anything on this forum or on YouTube concerning T@B stabilizers
The rear stabilizers are part of the frame. The diecast nuts are a typical failure point and are available as a replacement part. UK caravan dealers are the typical source of parts for that chassis.1 -
Re: jockey wheels on the AL-KO frames
The red handle on the side loosens the entire shaft assembly. The crank on the top provides about 8 inches of adjustment. When using, you lower ther entire assembly to a couple inches above the groun…2
