Hello Tab owners, I purchased a 2018 320 CSS used. I’ve been having trouble with the aldie system fan failure from the very beginning. I reached out to the service department at nucamp and they recommended resetting the unit by disconnecting the power and reconnecting it which worked for a while. On the last trip out I…
@Verna, @Petroffski I contacted ALDE-USA about this and got mixed responses. Initially, Spencer quoted the user manual and stated the Cabin Heat should be on when the Hot Water control is set to Off (wedge empty). So I asked the question again since folks are reporting different results. Spencer then tested his system with…
I think I set the temp to 66 but certainly a lower value than it could achieve. The fan is set to the automatic speed control position. I tuned it on again today in full sun, it was earlier this morning and internal temperature as per Alde display was 87. When I went out at 1:30 (still full sun) to take a nap and watch a…
I too am in midst of upgrade from Wefco to PD4135W2B (no V at end.) Nearly done. Q1: PD lead no.1 (red #10 awg) is battery connection with reverse polarity 40A fuse. Wefco has same function but NO lead going out, it goes straight to circuit board. No exiting wire. What do I connect this lead to on the 320S trailer? Don't…
@ScottG and @fstop32, you mentioned my use of heat shrink tubing on convector pipes, so I thought I'd provide the links below from two years ago with my photos & source of that & the coating fluid I used on the pipes. I have to say, that heat shrink tubing was not my original idea*(see bottom for sources), but I had not…
[Caution: If you find math/equations boring or painful, you can jump directly from the end of the first paragraph to "My Conclusion" below] I recently questioned whether a battery monitor shunt mounted inside a box (as suggested by Victron), needs vents for cooling, as some have suggested. The BMV-712 shunt is a fairly…
Over these first 4 years (has it been that long already?), most of our T@B camping was in Virginia state parks where we never had any electrical issues (that I know of, but how would I know for some things like voltage issues?). Now that we've camped at all 23 of them that allow RVs, and we are planning a trip using…
After reviewing other installations of this battery monitor, I wanted to share my method, which adds at least one new option. First, here's an overview of the wiring. Included with the BMV-712, but not shown, is a small wall-mounted display & control unit that connects to the coil of data cable, which BTW is an RJ12 cable…