3d printed lock for TAB 400 shower control

HedCount

I was tired of getting sprayed after accidentally bumping the shower control knob.  I created and printed a 3d model that slides down over the handle when not using the shower.  It prevents the shower knob from opening.  Slide on to lock, slide off to use the shower.

 

Binghi

That’s great! Have any for sale?

HedCount

@Binghi Yes, I do sell them.   $10 includes shipping.  2 for $15

xdr

How do we order one of these? 

HedCount

@xdr. Is be happy to send you one.  Unfortunately, I found that shipping costs were averaging about $8 each, so I need to raise the price to $13 for one, but can add additional unit for only $5 more each.

I have the orange and white already printed and can mail any time.

Let me know.   

Regan
Heyheadcount@gmail.com

Kevin_K

YES! Both my wife and I have been ambushed more than once by the shower. Emailing now.

AnOldUR

We've replace the shower head with one that has push button cut-off. Beside conserving water, leaving it in the off position should prevent these type of mishaps.

Jay_and_Kat

@HedCount if you're looking to go into mass production of these...
My wife and I would be interested in purchasing one from you.  

Mobean

Very clever @HeadCount.  You should apply for a patent before someone else does

HedCount

LOL.  I'll need a patent when I go on Shark Tank!

Jay_and_Kat

Do it!  DO IT!!  

Maxcamp

Nice job.  Slotting a PVC tee also worked on our 320s to prevent accidental activation.

HedCount

a few more colors

enzo86

Are you open to sharing the STL file so we can print our own ?

HedCount

I cant figure out how to put share the STL on this forum.  Happy to send it to you via email though

HedCount

@enzo86 I'll put it on thingiverse later today

HedCount

looks like I have to wait 24 hours to publish on thingiverse.  I will post a link to it once it's visible

HedCount

Anyone with a 3d printer themselves can download the STL file using this path to thingiverse   https://www.thingiverse.com/thing:6620979

elbolillo

@HedCount Thanks for providing the file. Got mine printed out…

HedCount

@elbolillo I usually chase the center hole with a drill bit to make sure it's round and fits right.  Cant remember the exact size of the bit at the moment.  I'll post that later when we get home.

xdr

@HedCount
Just got your shower locks…thank you! They are perfect!

HedCount

@elbolillo I use a 9/32nd inch drill bit to clean up the hole.  Makes it smooth and slide right on 

subkron

@HedCount
Yup, ran 9/32" as well, great fit and nice solution, thanks for sharing!

Jay_and_Kat

Our came in the mail over the weekend while we were on our shakedown trip to start the season.
We should've stopped for the mail when we brought the camper home, we could've put it in the camper before putting it back in the storage lot.

But, it looks DARN good and now we no longer have to worry about turning the shower on AND I suspect we'll be able to hang our loofah on it to dry after taking a shower!

Thank you VERY much @HedCount !!!

HedCount

glad you got it.   Yes, I think you will be able to hang things on the shower control now.  The lock is pretty sturdy

elbolillo

HedCount said:

@elbolillo I use a 9/32nd inch drill bit to clean up the hole.  Makes it smooth and slide right on 

Thanks for letting me know the size of bit to use. First attempt I used a bit that was too large. Had to reprint. Need to test it out when I am home. 

elbolillo

@HedCount Got the second one to work like a charm.

dlb

Regan,

Thanks, ours arrived today.

First thing my wife said after “this is great” was “can’t wait for other cool things he will print for the Tab”!

HedCount

LOL.  I'll be surprised as well

MarianneGiovanni

HedCount Out of curiosity, do you have any left?? We purchased the shut-off valve, and the shower still leaks when someone accidentally hits it. Your way seems like a better option!

DM159

Thank you for the design and printing.  Works great, looks good.