UCamp 18 rally ( replace your rear stabilizers with true scissor levelers)

Dalehelman

If you are attending the rally and are interested in this modification contact me. I have a simple adapter that will allow simple bolt on installation. I can instruct you in making your own or you can purchase a pair for $35

Homebodyatheart

@Dalehelman did this mod for me and I love it! The Tab actually feels less bouncy with them, and three point leveling is a breeze! It’s also quick and easy to put them down and up with my cordless drill.

Dalehelman

@Homebodyatheart
Thanks for the review. I don’t do this for the profit just my time, wear and tear and materials. 

jkjenn

Dale, I might take you up on this one. I will let you know. 

BrianZ

I guess this would also provide built-in jacks for changing tires or wheel maintenance, plus avoid the guessing game of where to put a jack.
Wish I was gonna be there.

Dalehelman

@BrianZ
The factory stabilizers can be used for tire and wheel servicing. It has been discussed at great length in many threads.  Basically chock wheels. Unhitch trailer. Lower tongue as low as possible with tongue jack. Extend rear stabilizers all the way to the ground. Then raise tongue till tires leave the ground. This provides a very stable three point platform to work from. Each stabilizer is rated at 1000lbs plus the tongue jack which is 2000 lbs.

BrianZ

Yep, I think I've read them all.  But you wouldn't reinstall the stabilizers.
My understanding is that stabilizers cannot be used for jacking up the trailer, just for statically holding the back end up off the wheels.  But your mod can do both, plus leveling, is that correct?  

Dalehelman

@BrianZ
Correct. Plus the added benefit that you can unhook your trailer. Reposition your trailer on site to take better advantage of a view or site. Without having to roll up on leveling devices. No need to carry and store additional leveling materials or bulky devices.

BrianZ

Ah, hadn't realized the repositioning benefit, another bonus. 
Here's a question about the mechanics of using your jacks fastened under the trailer for leveling: 
If the ground is unlevel between the two jacks, wouldn't that put lateral stress on the jack & its mounting to the trailer (unless you could make a level spot on the ground area immediately under the foot of the jack)?  I'm just trying to picture how the jack could remain vertical and not be leaning downhill with the slope.  Or maybe the foot has enough flexibility to adjust to a slightly unlevel ground.  Wondering what is the most out-of-level situation where you could still safely use the jacks.

Dalehelman

@BrianZ
In over 3 years we have never found a site that would not allow safe usage of the jacks. 

ericnliz

@Dalehelman did mine also...LOVE 'em!

TerryV6

Dale,  in for a penny, in for a pound.  Sign me up to purchase these...

Dalehelman

TerryV6 said:

Dale,  in for a penny, in for a pound.  Sign me up to purchase these...

Done. I have 5 pair available. 

dmerzbac

Dale, I'm ready to purchase these also. I will be at UCamp, so I can pay you then or send you a check. I also want to see if you will have time show me how to do the install. Do I just need to bring the scissor jacks?

BigGrover

I would like to purchase a pair if they will work on the 400 but I won't be attending the Ucamp rally .               

Dalehelman

dmerzbac said:

Dale, I'm ready to purchase these also. I will be at UCamp, so I can pay you then or send you a check. I also want to see if you will have time show me how to do the install. Do I just need to bring the scissor jacks?

Can do. The mounting plates on the jacks should look similar to the picture. You buy them in pairs for $60-$70. 24” jacks for 320 Max or 30” for boondocks 
https://www.amazon.com/dp/B001FC74P6/ref=cm_sw_r_em_api_c_S3UkBbDZZXFRS

Dalehelman

BigGrover said:

I would like to purchase a pair if they will work on the 400 but I won't be attending the Ucamp rally .               

I have not installed them on a 400 yet. I think the 400 uses the same stabilizer jacks as the 320 should work.

BigGrover

Thanks, how can I order the adapters from you?

TerryV6

So Dale, if you need the money front, just give me a total..

Dalehelman

TerryV6 said:

So Dale, if you need the money front, just give me a total..

No money needed up front

Carolyn

Dale, how do you feel about shipping a pair? We are unable to attend Ucamp.

BigGrover

Dale I would like to order a pair of adapters too.

Dalehelman

@Carolyn
@BigGrover
I will check on shipping and get back to you. Please send me your Zip codes.

ericnliz

@Dalehelman, See what 'ya started! Grand opening: @Dalehelman's Mod Shop!

Dalehelman

Delete 

BigGrover

Mine is 36092

Dalehelman

I currently have 5 sets at $25 per set. After these are gone it will be necessary for me to increase my price to $35. You can still make them yourself if you have an electric hand drill a hacksaw and file. Cost will depend on the price you have to pay for 2’ of 3/16x2” flat steel bar and 2 3/8” x1 1/4” carriage bolts. 
Yellow circle  dimension should be 5 1/4”
not 5 3/4”

Dalehelman

Dalehelman said:

@Carolyn
@BigGrover
I will check on shipping and get back to you.

Shipping cost $7.50 

BigGrover

No problem, how much total for adapters and shipping?

Dalehelman

BigGrover said:

No problem, how much total for adapters and shipping?

You should be getting a PM

Carolyn

46996