2021 400 limited hot water

I'm currently having an issue with my water only being hot in all sinks and shower for about 10 seconds. The 21 doesn't havethe bypass switch unless I overlooked it. Does anyone know what might be going on? I have the aldi system on correctly at the panel,I had a Tab 320 and it was fine . Here is a picture if anyone sees anything not right please let me know.
I'm sorry my phone somehow posted this 3 times. And I wasn't sure how to delete the other post.

Your settings are for a city water connection.  So, since you have had a 320 before, you know how to fill the Alde water tank.  Have you adjusted the mixing valve?  Also, what is the Alde Flo pump set at?

I think both of the 400 pumps are set at 2.  Do you know how to correctly adjust the mixing valve?
https://tab-rv.vanillacommunity.com/discussion/5018/no-hot-water-at-kitchen-sink-bathroom-sink-had-hot-water#latest

@Mdlawson79
I had to adjust my t@B 400's mixing valve 3/4 turn past the factory stop. Be careful as you can make the water hot enough to scald...so test it carefully after you adjust it.
Also, do you know how to turn on the 'shower boost' setting in the Alde control panel? This will allow nearly continuous hot water for the 30 minutes it cycles through.

@Mdlawson79 - the 2021 400 model does not have a separate Alde bypass valve.  

Mdlawson79 said:

No, I was reading how to do it, I think it looks doable for me. One more question does the 21 have a bypass valve?

Yes, it is the Red valve handle on the Nautilus control panel is the Alde bypass valve.  When set to Vertical it is in normal hot water operation mode.  So you have that set correctly.