Bedding for the 400

Comments

• Denny16 Member Posts: 5,431

  February 2021 edited February 2021

  That should work quite well.  We put a double bed topper on our TaB400 bunk, and I would not want anything larger, it just fits.  The bunk overall is actually 56” wide and 79” long.  It does have the front bottom corner cut off at an angle, but our topper is 78” long, so not an issue.
  cheers

  2018 TaB400 Custom Boondock,  Jeep Gladiator truck, Northern California Coast.

  0 · Share on FacebookShare on Twitter Share on Google+
• 1LilTabbie Member Posts: 24

  February 2021

  Thank you, Denny!  I really like the bedding so was hoping it would work.  And it looked like it might be difficult to tuck in a queen size, with the mattress tight on all sides.

  0 · Share on FacebookShare on Twitter Share on Google+
• Denny16 Member Posts: 5,431

  February 2021

  A Queen size is going to be too big, they are 60” wide!

  Cheers

  2018 TaB400 Custom Boondock,  Jeep Gladiator truck, Northern California Coast.

  1 · Share on FacebookShare on Twitter Share on Google+
• Deb55 Member Posts: 293

  February 2021

  We use full sized sheets, and a queen sized quilt. It's what we already had, and it fits well! 

  1 · Share on FacebookShare on Twitter Share on Google+
• falcon1970 Member Posts: 758

  February 2021

  I have also found a standard (also called Full) sized bedding works well.

  1 · Share on FacebookShare on Twitter Share on Google+
• Geegee Member Posts: 9

  February 2021

  Great info! We are getting our new TAB 400  boondock in a few days and I wondered what type of bedding would fit. I actually have full sized bed sheets so I'm good to go! I also have a thick mattress cover so I think I'll try that out and see if I need  a topper. Hubby and I are brand new so there will be more questions! It's so nice to have a community like this to help us through the rough spots.

  1 · Share on FacebookShare on Twitter Share on Google+
• AirBoss Member Posts: 740

  February 2021

  I use Full size as well. And I've decided to ditch the 3" memory foam pad and go back to the OEM version from the factory. Too warm and too hard to get out of.
  
  Nice modest mattress pad is all I have on the original cushions. 
  
  Time (and my back) will tell me if I made the right call. 

  2020 T@B 400 "OTTO" (build date 08/19)
  Factory Victron Solar; Norcold 3-way fridge
  '04 Chevy Tahoe Z71 DinoKiller
  San Diego, CA
  www.airbossone.com
  https://fineartamerica.com/profiles/owen-ashurst/shop
  
  
  

  1 · Share on FacebookShare on Twitter Share on Google+