Alde 3010 Mystery

Tampakayaker · March 2021

Couldn’t find my problem using search(at least not using a tablet). Thought I had the 3010 figured out. We have the digital touch screen. Used the heat the first night camping using shore power. Set temp to 78, power on 2, pump on 3 and continuous. In the morning I turned the Alde off....no green light in the button. Last night didn’t turn the Alde on, but in the middle of the night I guess the temps dropped and the Alde was running. Got up and the green light is definitely off. Is the Alde possessed,broken, or operator error?

4ncar · March 2021

Do you have the timer function activated?

Tampakayaker · March 2021

4ncar said:

Do you have the timer function activated?

I don’t think so. I could feel heat coming out the vents when I got up, and the light was off. I went into the maintenance menu and did a reset, hope that straightens it out for tonight. Thanks for the suggestion

Sharon_is_SAM · March 2021

@Tampakayaker - just to make sure, you know that the Alde pump setting can not be controlled via the touchscreen?

Tampakayaker · March 2021

Sharon_is_SAM said:

@Tampakayaker - just to make sure, you know that the Alde pump setting can not be controlled via the touchscreen?

Nope, didn’t know that....thanks

TXMacDad · March 2021

My first attempt to make a cheat sheet for the ALDE 3010 controller, does it look right?

Image: https://us.v-cdn.net/5021717/uploads/editor/gw/dphzkdvqvead.jpg

Sharon_is_SAM · March 2021

B and C are both separate single elements. If you want the full 2 kw use D.
C = B (just different elements)

ScottG · March 2021

Welcome, @TXMacDad. Good to see another slider guy here! :-)

What Sharon said. Your assessment would be true in a European Alde, where the higher line voltage allows the use of two different sized heating elements. Doesn't apply here in North America.

Alde 3010 Mystery

Comments

Categories