Broken grey clip for window shades

jtalarek · August 2020

Recently the grey clip that holds the window screen and privacy shade together broke off. I did call the dealer to order a new one but have not yet heard back. It is not clear to me how the clip is installed or how to replace it. has anyone else run into this
situation?

Bayliss · August 2020

@jtalarek, the clip is a Horrex Duo Plisse Excellent Window Blind and Fly Screen Catch/Clip (also referred to as a retaining clip.) I have never had to replace one, but if your dealer or nüCamp cannot help you out, you can search for it on Google and may be able to find one on eBay, or another distributor (probably in Europe.)

I did a quick search and found this site, which has a photo of it. Initially, I thought it consists of two pieces, but I soon realized that the photo probably just shows a front and back view. Thus, it appears that the clip may slip over the metal frame it is attached to and snaps in place.

https://www.importseasy.com.au/product/horrex-rocker-catch-clip-for-blind-flycreen

This amazon.co.uk link shows better photos of all angles of the clip:

https://www.amazon.co.uk/dp/B07SDGNGGD?tag=picclick02-21&linkCode=osi&th=1&psc=1

Image: https://us.v-cdn.net/5021717/uploads/editor/pz/8vxd733qbice.jpg

Mouseketab · August 2020

You might contact warranty@nucamp.com. They may just send you some. At the uCamp rally, Elsie was just handing them out. I grabbed a few and keep them in the camper.

AVIA_OWNER · November 2020

Hi I created a spring loaded latch for my shade with a 3D printer

we have an AVIA trailer.

here is the link to 3d file

aahnh · July 2021

Hi All-I'm now a member of the Broken Clip Club.
It seems that the original clip installation glues it to the top bar of the bottom/shade.
Any tips on "ungluing" or prying the glued broken piece off without damaging anything?
Thanks!

Mouseketab · July 2021

I had a clip break, and couldn't get it off. I just put a second clip on near the first, and left the broken piece on the shade.

Sharon_is_SAM · July 2021

@aahnh - DH says they just clip onto the bar.

aahnh · July 2021

@Mouseketab - that's what I was afraid of. I'm guessing when so many folks were saying the clips were falling off in the earlier models, the nucamp installers decided to glue them. I appreciate knowing I'm not alone at least.

@Sharon_is_SAM - Thanks! Just wish the original wasn't glued so well.

Slackers · July 2021

We're members too. Our clip appears to be glued.

Deb55 · July 2021

In a pinch, a binder clip works to hold the screen to the shade. I always keep a few of those in my 400 for bags of chips, etc.

George101 · July 2021

Deb55 said:

In a pinch, a binder clip works to hold the screen to the shade. I always keep a few of those in my 400 for bags of chips, etc.

Good tip!

dhauf · July 2021

AVIA_OWNER said:

Hi I created a spring loaded latch for my shade with a 3D printer

we have an AVIA trailer.

here is the link to 3d file

Thats really cool, thank so much for sharing this. These look like a great option to replace the clips when they break.

ScottG · July 2021

And in a real pinch (no pun intended), opposable thumbs also work well. ;-)

Seriously, I've never quite figured out the reasoning for those clips. My 2015 doesn't have them and I've never felt they were needed. Do the shades have a tendency to drop without them? It seems they started installing those right around the time they flipped the orientation of the shades and screens. (My shades pull down and my screens pull up.)

Deb55 · July 2021

@ScottG my guess would be that if you have your windows open and you're half shading and half screening for privacy (my shades pull up) any little gap between the screen and shade will allow bugs in.

ScottG · July 2021

Deb55 said:

@ScottG my guess would be that if you have your windows open and you're half shading and half screening for privacy (my shades pull up) any little gap between the screen and shade will allow bugs in.

@Deb55, in theory I would have the same issue with a potential for gaposis between the shade and the screen, but I don't so long as I am careful to use those thumbs properly. That's why I wondered if the need for the clips was somehow related to the shade and screen tending to separate on their own when their orientation is reversed.

Hmmm. At least I don't think I have a gap there... but now you have given me something to check more closely. :-)

PNWtabber · June 2022

Has anyone found these clips (Horrex Duo Plisse Excellent Window Blind and Fly Screen Catch/Clip) in the USA? My son borrowed my trailer and broke one. I want him to replace it. I googled, but all of the links seem to be in the UK or Australia.

Jay_and_Kat · June 2022

Favoriting this topic for the day one of our clips breaks...

And wondering if it'd be possibly to put strip magnets on the screen and shade channels to hold them together instead of a clip (I know the channels are aluminum and non-magnetic, but using some sort of double-stick tape to hold the strip to the channel should work)

Slackers · June 2022

I figure you're thinking of mounting the magnets on the inside of the channels and not between them. I guess that would work. We broke one of ours last year, but haven't fixed it yet. The screen and shade can be placed close enough without a clip. Still a clip or your magnets will work better.

PNWtabber · June 2022

FYI, I emailed NuCamp as suggested above and received this reply:

"Unfortunately we do not sell direct so this would have to be ordered through one of our dealers. A lot of our dealers will drop ship the part directly to you."

Wish me luck with the dealer, otherwise I may have to make a trip to the UK, where they seem to be available.

Sharon_is_SAM · June 2022

@PNWtabber - they are available on EBay. If you use a dealer, I suggest Missouri Teardrop Trailers. Get several, just in case.

PNWtabber · June 2022

Sharon_is_SAM said:

@PNWtabber - they are available on EBay. If you use a dealer, I suggest Missouri Teardrop Trailers. Get several, just in case.

I saw the eBay ad, but it is in UK, so shipping might be a factor. I already reached out to my local dealer, we'll see what they say. My son has to pay for it since he broke it -- maybe I should make it as painful as possible?

Bayliss · June 2022

@PNWtabber, see this discussion for a possible better source for the clip:

https://tab-rv.vanillacommunity.com/discussion/comment/173238#Comment_173238

PNWtabber · June 2022

Thanks, @Bayliss

Slackers · June 2022

How does one remove the remnants of a broken clip? The large remaining portion of the clip is firmly fixed to the metal portion of the shade.

Jake_Elwood_and_us · June 2022

Ours just came off on our rear window this past week while camping.

Popped right back on...easy peasy. 2021 400

Sharon_is_SAM said:

@aahnh - DH says they just clip onto the bar.

Slackers · June 2022

There's some kind of glue on ours. No popping off. 🫤

Tabaz · June 2022

I thought my broke clip was also glued in. Turns out there's a trick to removing it. I'll do a short video tonight and post it here.

PNWtabber · June 2022

So, my local dealer says $2.50 per clip, plus shipping.

Tabaz · June 2022

Still photos have to suffice. Simply take a flat blade screwdriver and place between the plastic clip and the aluminum shade. Gently twist the screwdriver from the bottom towards you. This should pop out the bottom of that side of the clip. Repeat on other side.

Image: https://us.v-cdn.net/5021717/uploads/editor/08/4jn3x11qj4zv.jpg

Image: https://us.v-cdn.net/5021717/uploads/editor/h7/2xzyuq8hfv6q.jpg

Slackers · June 2022

Thanks. I'll try that.

Slackers · June 2022

Got it off. Thanks!

Broken grey clip for window shades

Comments

Categories