2010 TQ Furnace stopped working

Tablet · May 2023

Hello!

We have a 2010 TQ model that my wife has been using as an office between camping trips, so it is in regular use. Recently the furnace stopped working. When I adjust the thermostadt to attempt to get it to go on, I hear the usual click where it would normally engage the furnace, but nothing else happens. Everything else electrical seems to be working fine, and all fuses are intact, and the propane detector seems to be working correctly. I am not so savvy on this side of things. Any ideas what to check? Thanks!

rfuss928 · May 2023

Are you sure you have propane??
If the furnace fails to light after 3? tries it will not try again until a reset button is pushed. There will be a red flashing led behind the front cover and a switch next to it.
I've also attached a manual

Tablet · May 2023

Yes I'm sure I have propane, and the furnace behaves differently when we are out of propane. The fan comes on (it's not coming on now) and you can hear the click of the furnace trying to engage a few times before it stops trying. That is not happening now, there is no fan, and one click of the initial switch of the thermostat and that's it.

Tablet · May 2023

A friend has suggested that it may be a dirty or defective sail switch.

2010 TQ Furnace stopped working

Comments

Categories