First Setup of AllPro Shade Wing Visor

new2nu · July 2023

The awning/visor arrived during a week of rain so today was the first day I was able to set it up. It was a bit strange, and I had just a bit of difficulty getting it into the keder rail after installing the fiberglass pole, but I was able to do it with slow but continual progress. Taking it down was A LOT faster. I have no complaints. I do wish the door was designed to not touch the awning though, but I don't think that will be a problem. I was concerned about one person being able to set it up but I didn't have any problems. The step came in handy.

The door on my old popup was rectangular and the upper outer corner sliced into the awning one day when I wasn't being careful and I had to patch it with some awning tape; never had a problem with it. At least the T@B's door is rounded.

Image: https://us.v-cdn.net/5021717/uploads/editor/jm/p72j0558ew7q.jpeg

Sharon_is_SAM · July 2023

@new2nu - securing the open door to the handle on the front of the TaB using a stiff bungee or cord will limit door movement and reduce the wear on the visor. That has worked with our PaHaQue tent.

new2nu · July 2023

Sharon_is_SAM said:

@new2nu - securing the open door to the handle on the front of the TaB using a stiff bungee or cord will limit door movement and reduce the wear on the visor. That has worked with our PaHaQue tent.

I'll see how that works. Thanks.

First Setup of AllPro Shade Wing Visor

Comments

Categories