First Setup of AllPro Shade Wing Visor

new2nu

The awning/visor arrived during a week of rain so today was the first day I was able to set it up. It was a bit strange, and I had just a bit of difficulty getting it into the keder rail after installing the fiberglass pole, but I was able to do it with slow but continual progress. Taking it down was A LOT faster. I have no complaints. I do wish the door was designed to not touch the awning though, but I don't think that will be a problem. I was concerned about one person being able to set it up but I didn't have any problems. The step came in handy. 

The door on my old popup was rectangular and the upper outer corner sliced into the awning one day when I wasn't being careful and I had to patch it with some awning tape; never had a problem with it. At least the T@B's door is rounded. 

Sharon_is_SAM

@new2nu - securing the open door to the handle on the front of the TaB using a stiff bungee or cord will limit door movement and reduce the wear on the visor.  That has worked with our PaHaQue tent.  

new2nu

Sharon_is_SAM said:

@new2nu - securing the open door to the handle on the front of the TaB using a stiff bungee or cord will limit door movement and reduce the wear on the visor.  That has worked with our PaHaQue tent.  

I'll see how that works. Thanks.