Inside table

How do you get the table in the upright position??   We have tried just about everything!!  It shouldn't be this hard :-)


Comments

  • greggill
    greggill Posts: 45
    I've struggled with both putting it up and taking it down. Once you figure it out you'll have it. Pull forward and up. I doesn't pull straight up.
  • 2Cougs
    2Cougs Posts: 934
    I agree... Once you figure it out it becomes easy.  If your table is like mine, I put one foot on one of the table feet and do just like greggill says... Sort of toward and up or away and up (depending which direction the table was put in ), but not straight up.
    2016 T@B CS-S silver with white trim and WSU themed
    Pulled by a silver 2017 Chevy Silverado
    Leaves on T@bventures from Spokane, WA


  • ericnliz
    ericnliz Posts: 4,437
    Ha, Mine went out & about! ;)
    2016 T@B MAX S-aka: WolfT@B
    TV: 2006 Chevy Avalanche LT Z71 aka: WhiteWolf, or 1972 Chevy Custom10 P/U aka: SnarlingWolf
    Spokane, Wa.
    Eric aka: Lone Wolf  


  • Mwamba
    Mwamba Posts: 22

    Thanks all, I'm going to try it now.   If it's going to be a hassle, soon ours will follow suit with ericnliz's :-)


  • ScottG
    ScottG Posts: 5,688
    ericnliz said:
    Ha, Mine went out & about! ;)
    That was your problem, ericnliz--yer supposed to pull the table up and around, not out and about!  :-)
    2015 T@B Max S (320)
    2015 Nissan Frontier SV V6 4x4
  • ericnliz
    ericnliz Posts: 4,437
    Good one @ScottG! After giving that table numerous DNA samples, OUT-SKIE!
    2016 T@B MAX S-aka: WolfT@B
    TV: 2006 Chevy Avalanche LT Z71 aka: WhiteWolf, or 1972 Chevy Custom10 P/U aka: SnarlingWolf
    Spokane, Wa.
    Eric aka: Lone Wolf  


  • Mwamba
    Mwamba Posts: 22
    edited July 2017
    Mission accomplished!   Pulled it forward and up with my foot on the base but had to do it on both sides.   Maybe the previous owners didn't bother with it much and it just has to be loosened up a bit ;-)    Thanks again all!