@DanWeitzel, they were 1-inch clamps and half inch wide, from Amazon..Koehler Enterprises KE12BX 10 Piece Hose Clamp Box (Size SAE 12),Silver https://a.co/d/hxrwjlzI think this was the absolute minimum size that would work, as I found myself wishing they were a bit larger, as they were more difficult to get started, especially if you had to use only one hand. I liked the 1/2" width though - seems optimal to me. If I had to do over, I'd get the next larger size over 1-inch.
Thank you, @ChrisFix, @ChanW, @1968Healey, and @N7SHG_Ham for educating me about trucks. Like my father, I've never owned one, and before getting our T@B, the biggest thing I ever hauled or towe… (View Post)
At the end of 6 months into this historic year, we finally got out on the road with our T@B. There were only a couple of non-specific sites left, but we were pleasantly surprised at how nice #5 was h… (View Post)
Just fyi, here's what our A/C drain pan looks like with the unit removed.. Ours slopes away from the vent wall & slightly towards the front. The drain hole is in that little extension toward… (View Post)
@Marceline, Below are my photos of the method I used, with the PWM controller mounted in the empty space, speed control knob mounted underneath it, and 3-way switch rewired as on/off switch. (I made … (View Post)
Ditto what Sharon said - when bed is made, we pop the top off & slide it & the L-shaped support under the bed. The real problem, IMO, is that it's just too big. So, we've done like … (View Post)