400 ceiling Question

justdoit70 · May 2021

2021 t@b 400 boondock solo . Looking at the ceiling just in front of the stargazer window to the first seam strip ,heading toward the front of the trailer, I noticed that the inner ceiling panel feels that the adhesive has failed and that section of inside material has come loose from whats above. If you push up in that area it is not the same ,it feels sticky under and there is movement.if you touch any where else on the ceiling it is solid has any one noticed this issue. All please check and report back if you can thanks.
Ed

RMo · May 2021

All solid on my 2019 400.

ColoradoSun · June 2021

I don't see anything like you describe on the ceiling of our 2021 T@B 400.

rhyno · June 2021

Our 2021 400's ceiling has some give when I press on it but nothing to indicate its coming loose. I would recommend contacting your dealer and/or nuCamp to address the issue through them before starting any DIY work.

manyman297 · June 2021

One thing you might try is injecting adhesive (like CA glue...super glue essentially) using a syringe. You can buy CA glue on amazon in a very liquid-like consistency and use a syringe to pierce the areas where the ceiling is breaking free and inject the glue. If the area is somewhat contained this should work.

justdoit70 · June 2021

Thanks to all that checked their’s for me. No other 400’s out there?

bergger · June 2021

Our 2021 400 ceiling seems just fine. Has a little give to it but does not have any indication of coming loose or separating.

Verna · June 2021

@justdoit70, if you are looking to get it fixed, you do have a one year warranty from nuCamp. Please contact your dealer first. They will contact nuCamp for guidance from them. Please keep in touch with your dealer through this process.

Howdy, Stranger!

Quick Links

Categories

400 ceiling Question

Comments