First Solo Drive, Facing Down the Fears

rfuss928 said:
My original pneumatic jockey wheel tire degraded very quickly developing leaking cracks- cheap Chinese tire.  It was common for many other owners to fill them with Slime flat prevention fluid or replace them with another tire and wheel.  I replaced mine with a heavy duty industrial unit.
A cover would help prevent the degradation but sounds inconvenient.
My spare is mounted to the side of the tongue box using the original bracket from the bottom of the T@B.  There is less space on the tongue of my CS model than other DM models like yours.  There is possibly room for another type bracket on your frame.  It seems I remember some suggestions on the Yahoo forum.

rfuss928 said:

It does take a bit of mechanical aptitude to adapt another wheel and tire to the Alko bracket.  You will probably need a 5 inch long bolt either 5/8" or 3/4" diameter for an axle.   A tire something like this would be appropriate.  The "universal fit" parts solve some of the adaptation problems. 

http://www.ebay.com/itm/Marathon-Universal-Fit-Pneumatic-Air-Filled-Hand-Truck-Utility-Tire-on-Wheel/322415174762?_trksid=p2047675.c100005.m1851&_trkparms=aid=2220072&algo=SIC.MBE&ao=2&asc=41395&meid=beadfbfb0c854fe08f3ef506e3b0a4f8&pid=100005&rk=2&rkt=6&sd=122043656184.

Not necessarily a recommendation, just what I found doing a quick search on your behalf.

Have fun!!