Format changes are still occurring as we identify issues. We have made some font changes to improve readability and are working on restoring options that were available in the old forum version. Please comment on your findings and suggestions.

Thanks

qhumberd
Moderator

Sewer Hose Carrier

13»

Comments

  • BrianZ
    BrianZ Member Posts: 1,770
    edited May 2018
    How did you mount the hose carrier, @leenscottfl ?
    I've been wondering if one could just use two large stainless hose clamps, and strap one around the tube & second one through that one and around the frame.
    -Brian in Chester, Virginia
    TV: 2005 Toyota Sienna LE (3.3L V6)
    RV: 2018 T@B 320S, >100 mods 
    · Share on FacebookShare on Twitter Share on Google+
  • leenscottfl
    leenscottfl Member Posts: 254
    I just used really heavy duty cable ties. The carrier behind the box fits snugly enough that the ties are  just insurance. 
    Scott, Orange Park, Florida...2012 Jeep Wrangler Unlimited Sahara... 2015 T@B S Maxx "Buttercup".
    · Share on FacebookShare on Twitter Share on Google+
  • BrianZ
    BrianZ Member Posts: 1,770
    edited May 2018
    Thanks, @leenscottfl , I think I will also try cable ties, but in combination with one of these around the tube to help grip it, cushion it, & fasten it to the trailer frame..

    I will cut it in half and put one over each side of the frame.  That's my current plan anyway, but I don't see any reason why it shouldn't work.  I feel like the rubber would serve as a bushing to help cushion it on the frame & help prevent it from sliding around.  Maybe add a second cable tie for insurance.
    If this doesn't work, there's always the screw mount option, otherwise it's cheap, easy & would save putting holes in the trailer that would add one more spot to worry about maintaining a good seal.

    -Brian in Chester, Virginia
    TV: 2005 Toyota Sienna LE (3.3L V6)
    RV: 2018 T@B 320S, >100 mods 
    · Share on FacebookShare on Twitter Share on Google+

Categories