Dalehelman

I just replaced the crank with if I remember a 1/2” bolt. Just pop off the top cover for access. I think it was a 6” bolt. I cut off the thread. Then I drilled a small hole in it to match the crank handle. If you are not good with tools. Ask a friend or neighbor. Good luck 

• Activity
• Posts121
• Comments2.3K

• Re: Carpet Outside T@B

  Dalehelman

  August 2015
  We like the feel of grass under our bare feet. We have a 6'x8' piece of artificial grass. We roll it up and carry it on rack I built that mounts on the front push pull handles.
  3

• Re: Where do you store your sewer hose?

  Dalehelman

  July 2015
  I am going to store my sewer hose at the rear of our T@B just under the license plate. I will be using a 66" length of Corex corrugated drain pipe from Home Depot cost $6.99 for 10' and 2 s…
  2

• Re: Norcold won't stay lit

  Dalehelman

  July 2015
  Holding the red button in has no effect on the igniter. Once the green light comes on the burner is lit. Holding the red button in allows gas to flow long enough to allow thermocouple to heat up whic…
  2

• Re: Post up some shots of your T@B set-up at the camp site!

  Dalehelman

  June 2015
  Riley Creek COE campgrounds on the Priest River near Priest River Northern Idaho
  1

• Toilet flush valve

  Dalehelman

  June 2015
  So I noticed yesterday the flush valve is not closing completely. Just a slight trickle hardly noticeable. The problem is over a period of time it will fill the bowl. I will replace the water control…
  1

Previous Next