Horigan

I use a Ridgid 3 gallon shop vac with the 1.25" hose end. I just use a bunch of duct tape to connect it to the hose. It's really easy when you have the closet version 400. (View Post)

@ReenieG I used only 1/2" 3M 5952 tape with no other sealant or adhesive. The gaps were only an inch wide at each lower corner in case water got under the panel so it could drain out. 1" wi… (View Post)

I placed the 1/2" VHB tape around the perimeter of the panel, with a one inch gap at the bottom corners for drainage. Make sure both surfaces are clean, with 3M adhesive remover or mineral spiri… (View Post)

Nice! A heat gun really helps with butyl tape removal in the future. (View Post)

Nice! (View Post)