Horigan

I found using the shop vac method was very quick and easy and it clearly got all the fluid out. I don't know exactly where the check valve is, but it doesn't matter with this method. Refilling the sy… (View Post)

The lower hose I attached the shop vac to is the flow INTO the reservoir. You can confirm which hose flows into the reservoir by blowing into each of them. There is a check valve in the system, so t… (View Post)

I just ran the power through a rocker/toggle switch. It's three pole; ground (tee'd off of radio ground), power from T@b, and power to Jenson. LED lights up when switched on. Drill the hole next to t… (View Post)

Though not quite as nice as the maple top, this inexpensive option from Home Depot has been working great for us, and it's already coated with polyurethane (26" x 18" x 0.7"). I've bou… (View Post)

Our 2019 has a similar layout behind the sink as the 2020, though there is no P-trap. Just hot and cold lines to cap and a drain hose to cap, which you can seen a bit on the bottom shelf that we put… (View Post)