Outside shower hose modification

elbolillo
elbolillo Member Posts: 549
in Modifications & Upgrades
I was inspired by AnOldUR and ordered up the needed parts and did this modification this morning. Super happy with this. Now I can store stuff in that space without the hose getting caught up on anything and now I have more flexibility in use with a 12' hose.
_____________________________________________________
Ken / 2023 Tab 400 “La Bolita” (31,000+ miles) / 2024 Toyota Sequoia
· Share on FacebookShare on Twitter Share on Google+

Comments

  • Bt0325
    Bt0325 Member Posts: 7
    Nice nice job.  Can you please provide the bulkhead and quick disconnect part numbers.
    2021 CS-S, “Skreppa”
    Jeep Wrangler JLU
    3.6L eTorque
    3.25 inch hitch drop
    · Share on FacebookShare on Twitter Share on Google+
  • elbolillo
    elbolillo Member Posts: 549
    Bt0325 said:
    Nice nice job.  Can you please provide the bulkhead and quick disconnect part numbers.
    NS6D42008 Valved Panel Mount Hose Barb Coupling Insert 1/2 ID Barb
    NS6D10008 Valved Male Thread Coupling Body 1/2 NPT

    These are very high quality and solid parts.


    _____________________________________________________
    Ken / 2023 Tab 400 “La Bolita” (31,000+ miles) / 2024 Toyota Sequoia
    · Share on FacebookShare on Twitter Share on Google+
  • YanniLazarus
    YanniLazarus Member Posts: 366
    Looks like those are from Amazon...
    What about a number for the short connecting hose?
    And will you close up the shower head recess opening? 
    Yanni Lazarus 2020 T@B320S, 2018 RAV4 Adventure, Central CT
    · Share on FacebookShare on Twitter Share on Google+
  • Tabnero
    Tabnero Member Posts: 252
    which part is the one shown in the exterior side of the access box

    · Share on FacebookShare on Twitter Share on Google+
  • elbolillo
    elbolillo Member Posts: 549
    Tabnero said:
    which part is the one shown in the exterior side of the access box

    NS6D10008 Valved Male Thread Coupling Body 1/2 NPT
    _____________________________________________________
    Ken / 2023 Tab 400 “La Bolita” (31,000+ miles) / 2024 Toyota Sequoia
    · Share on FacebookShare on Twitter Share on Google+
  • Bt0325
    Bt0325 Member Posts: 7
    My observation is that the short connecting hose on the interior is the original hose cut to length.  As for the recess opening, I’m thinking of closing it with a piece of better quality styrofoam, using epoxy to securely attach.  Closing this hole reduces the potential for rodent access.
    2021 CS-S, “Skreppa”
    Jeep Wrangler JLU
    3.6L eTorque
    3.25 inch hitch drop
    · Share on FacebookShare on Twitter Share on Google+
  • AnOldUR
    AnOldUR Member Posts: 1,728
    edited December 2021
    Not sure if I was the first to add the quick disconnect to the outdoor shower location, but covering the hole where the original shower head stored was not a concern. There are no risks (insulation, rodent ...) involved in this setup than where not already present when the access door is open an hose is in use. I did put a small strip of foil tap over the hole to be safe. Bad picture, but you get the idea.

    Stockton, New Jersey
    2020 nuCamp T@B 320S * Jeep Wrangler
    60,865 camping miles through the end of 2025

    · Share on FacebookShare on Twitter Share on Google+
  • AnOldUR
    AnOldUR Member Posts: 1,728
    Heads up to @elbolillo, you may want to put a hose clamp on your inside connection. It is a tight fit over the barbed fitting, but hot water can soften the hose allowing the pressure to push it off.
    Stockton, New Jersey
    2020 nuCamp T@B 320S * Jeep Wrangler
    60,865 camping miles through the end of 2025

    · Share on FacebookShare on Twitter Share on Google+
  • elbolillo
    elbolillo Member Posts: 549
    AnOldUR said:
    Heads up to @elbolillo, you may want to put a hose clamp on your inside connection. It is a tight fit over the barbed fitting, but hot water can soften the hose allowing the pressure to push it off.
    Yeah, I had two hose clamps the day I was doing the install. One was too big. The other too small. Gonna get that fixed this week. 
    _____________________________________________________
    Ken / 2023 Tab 400 “La Bolita” (31,000+ miles) / 2024 Toyota Sequoia
    · Share on FacebookShare on Twitter Share on Google+
  • elbolillo
    elbolillo Member Posts: 549
    YanniLazarus said:
    Looks like those are from Amazon...
    What about a number for the short connecting hose?
    And will you close up the shower head recess opening? 
    Picked up the pieces from freshwatersystems.com and eBay. Short connecting hose was my original hose cut to size. And I will probably just put a piece of foil tape over the opening. 
    _____________________________________________________
    Ken / 2023 Tab 400 “La Bolita” (31,000+ miles) / 2024 Toyota Sequoia
    · Share on FacebookShare on Twitter Share on Google+

Categories