Replacement Jack Wheel 2005 320

TravelinStovetop · June 2022

We just purchased a 2005 T@B 320 and the hitch wheel looks to be in pretty bad shape. We'd like to replace it before heading out on the road next week. Does anyone know the size and best place to purchase another? We are on Ontario, Canada. TIA!

(Title altered for clarity. Moderator)

Geo · June 2022

@TravlinStovetop, try this
Alko 6" Jockey Wheel Trailer Caravan Genuine Alko | eBay
Many parts for our DM T@B's are available in the UK.

rfuss928 · June 2022

If just the wheel is bad, something like this makes a good replacement. A 5 inch long bolt 5/8 in diameter is needed for an axel. 10 Solid Rubber Tire

https://www.harborfreight.com/10-inch-x-2-1-2-half-inch-solid-rubber-tire-35459.html

Alko specification:

10" Jockey heavy duty wheel only.

The AL-KO Jockey Wheel with Galvanised centre and Solid Tyre 250mm is designed for stability, durability, ease of operation and long service life.

Wheel diameter 250mm / 10"
Tread width 84mm
Width at axle 104mm
Solid tyre
Galvanised steel centre
Plastic axle bearing / bush
Suitable for up to 19mm axle (nominally 20mm diameter ID bush)
Suitable for all caravans and all trailers
High-quality corrosion protection
Wheel is rated to 400kg

TravelinStovetop · June 2022

Thank you SO much!

TravelinStovetop · June 2022

Upon further examination....the metal on the bottom of the jack where the wheel is, looks to be slightly cracked. We will be travelling a lot and need it to be safe. Our tire guy who just serviced our Jeep had a look at it and said it might be an idea to replace the entire thing (green and red arrows) as the top is also missing a handle to make it easier to turn. He said we could check out Trailer World here in Ontario....OR is there a place that sells vintage T@B (2005) jacks?

Mouseketab · June 2022

https://www.caravanparts.co.uk/advanced_search_result.php?keywords=alko+jockey+wheel&search=

TravelinStovetop · June 2022

We are hoping to get on the road in the next week and there's a few things that need to be fixed but I am wondering short of ordering an entire new jack, would a jack foot suffice? Long or short? I'm not sure a jack from Harvest, AL would be received on time (I am in Canada)...

Image: https://us.v-cdn.net/5021717/uploads/editor/sd/1h024bjdillv.jpg

Sharon_is_SAM · June 2022

Aside from not allowing you to roll the TaB into a desired position, a Jack foot works well.

rfuss928 · June 2022

The ALKO tongue jack on the DM T@Bs does not have a removable foot or wheel. Some similar size wheel and axel retrofit is the only quick fix.

TravelinStovetop · June 2022

The bottom tube with the wheel attached came right out and off when the jack was high. Someone else on YouTube said they remove their wheel while driving as it is illegal in some states to keep it on while on the highways.... ?

Denny16 · June 2022

That works with the later nüCamp built TaBs, but the DM TaBs with the AL-KO Jockey Wheel, the jack shaft And wheel assembly are one welded up unit, and the wheel retracts up into the area in front of the hitch, giving the proper ground clearance whilst towing.

@t@TravelinStovetop, I would just replace the Jack shaft and wheel with a replacement unit. For a temp fix, you might be able to weld the crack?

Cheers

Mouseketab · June 2022

TravelinStovetop said:

We are hoping to get on the road in the next week and there's a few things that need to be fixed but I am wondering short of ordering an entire new jack, would a jack foot suffice? Long or short? I'm not sure a jack from Harvest, AL would be received on time (I am in Canada)...

Actually, the link I posted was from the UK, I am in Harvest, AL

Replacement Jack Wheel 2005 320

Comments

Categories