2018 Tab 320 refrigerator exterior vent cover replacement.

Rpd2020
Rpd2020 Member Posts: 1
in Air Conditioning & Refrigeration
So many dead ends trying to find this. It measures 14.5 x 7.   It appears I need to cut a different size hole then replace the entire vent assembly. How's your hope not. 

Comments

  • qhumberd
    qhumberd Administrator, Moderator Posts: 846
    @Rpd2020 can you post a picture? That may help provide some workaround ideas.
    2019  T@B400 Boondock Lite "Todd"
    2016 Toyota Tundra 5.7 Crew Cab
  • Bayliss
    Bayliss Member Posts: 1,517
    @Rpd2020, here is a prior discussion that may be of interest, but last time I checked, the part was not available.  I could not locate a replacement online.  Regardless, maybe the info provided will help you out:

    https://tab-rv.vanillacommunity.com/discussion/17903/cover-for-exterior-refrigerator-vents-on-t-b-320s#latest

    Also, see the post by @AnOldUR in this discussion thread:

    https://tab-rv.vanillacommunity.com/discussion/16446/any-thoughts-on-how-to-isolate-a-water-leak-source#latest


    2019 T@B 320 S Boondock Lite; 2025 Toyota Tundra CrewMax 4x4
    (Alde: 3020; Refrig: Isotherm Cruise 65 Eleg; Battery: BB 100Ah LiFePO4; Solar: Renogy 220W Portable Suitcase w/ Victron SmartSolar MPPT 75/15 Controller; Victron BMV-712 Battery Monitor w/ Shunt; Pwr Cntr: PD-4135KW2B; EMS: PI-HW30C)
    Greg & Marlene (Tucson, AZ)


  • Cherokee
    Cherokee Member Posts: 346
    I lost mine in a cross-wind.  Vogel's RV, 2500 N State St, Ukiah, CA 95482 (707) 468-5635got replacements fro  NuCamp and had them sent to my home. I reattached them with SS bolts into speed nuts. RE my post. Last time I talked to Kelly, she remarked that she can now only get them in Aluminum  
    TV:2019 Nissan Frontier PRO-4X With an Old Man Emu lift
    Trailer: 2019 T@B 320 Boondock with a Lock&Roll Coupler & Jack-e-up
    Custom fabricated metal bottom cladding
    California, USA
  • 3DPrintGuy246
    3DPrintGuy246 Member Posts: 6
    Hi! Im new here, and I got tired of searching for a new vent cover for my 2018 NuCamp T@B 320 S, so I took measurements and modeled up my own 3D printed replacement. It works great!
    I figured many others may be interested, so Im offering my services!

    If you're interested in purchasing one please let me know. 

    Labor/Materials = $80

    ("speed nuts" and bolts included) 

    Color choices are White or Black (If you want a custom color, or even a custom design, let me know!)

Categories