Phase 2 of utility access, battery inverter access. Moved the hinges from the front storage cover to the back of the battery/inverter cover. Then modified a piano hinge for the front cover to 1/2 inc… (View Post)
Decided to make accessing the under bed utility bay easier by hinging the plywood cover and installing a hold open bracket. As luck would have it there is an aluminum horizontal frame member in the w… (View Post)
Often find the Allpro awning support legs are too short due too ground being lower then the parking pad and sometimes the pad runs uphill alittle which requires the raising the trailer front to level… (View Post)
Another take for sliding flatware tray. Used the original tray and fabricated slide tracks and support pan from sheetmetal. Also made a stop mounted to cabinet to keep tray from hitting the LP hose c… (View Post)
Needed to counter sink the mounting screws to allow easier install of the awning cord. Narrow slot so a regular counter sink bit wouldn't fit. Took a regular 1/4 inch bit and ground down the tip to m… (View Post)