Well we thought all was good this morning, but when we hooked up the battery again, the Alde system did not come up at all. Yes we checked the fuses and the things one is supposed to do. So since we were still in Sugarcreek, I gave Austin from the service center a call and told him the problem. We tried trouble shooting it…
And if he did wire a RV 120VAC30 Amp receptacle, you can hold him responsible for all damage, especially if you told him this was a 120VAC Service. You,should consider giving him a bill,mince you get all the damaged sorted and cost added up. Hope everyworks out OK. Receptacles in the trailer would not get damaged, and the…
@Maple_Geek, have you also tried disconnecting and reconnecting the cables on top of the Alde boiler (depicted in photo below)? Also, I do not ever recall reading that it is a troubleshooting option, but just for the heck of it, depress and hold the display panel power button for about five seconds, and then release. You…
@fstop32 Good idea on the check valve. As a homebrewer I have bottle brushes that will definitely clean the hoses out. I respectfully laid out in my last email to Alde this morning that suggesting a trip to Elkhart for every problem was not the best customer service response, and that as much as I love the Alde compared to…
Saw another post on today on the Alde Freight train, and thought I'd update my review of this fix I did last year. We used the Alde quite a bit last winter at ski areas, and it was perfectly quiet, usually camped around 4-5000 ft. So far I've had to replace the thermal fuse on the circuit board, fix this rumble, and have…
@nettles - the control panel is wired for 12 V. If your battery switch is turned on, you select “electric” only for heat and/or water and your Alde is not plugged in under the bench, the control panel will light up, but the Alde will not heat. Close the LPG tank, then very, very slowly open the tank. If opened too quickly…
We also have the 2019 and I did a full flush and refill (but with Century glycol) a few months back. I learned that there are a couple of things you can check yourself. One would be the pump setting on the Alde. NuCamp likely set it back to around 2. It is a tiny dial with a small arrow on mine. If you turn on the Alde and…
I spoke with Creed at NuCamp today and went over my issues with the Alde system in my T@B 400. He was as perplexed as the rest of us. He put me in direct contact with a Product Specialist from Alde. The first thing that the Specialist asked me to do was to go into the "Service Page" of the Alde menu and check the…
No, it’s high! I paid $264.37 the end of January for mine and it’s simple to install. I just paid $478.35 for a new circuit board because the control panel is probably fine because the new one didn’t work either, so I have two now. Call Alde tech support directly and talk it through with them before you buy. They were…
Thank you for the detailed photos and writeup. @tincan, another 2014 T@B owner @Chan found this circuit board fuse to be faulty a few years and documented replacing it. Maybe he will chime in with a link to his post. One thing we former and current owners have discovered about the Alde is that if you turn off the controls…