Best Of
Re: profile question
@Twojgrams Thanks for the answer to my question. The rest of you were know help at allTwojgrams said:Currently, a member accrues a point for every reaction another member gives a post, except maybe flag, not sure what that does.
was that even your question?
Re: profile question
@Homebodyatheart, that post was a tricky move. You just earned another point ; )
Re: Utility Platform
Thanks a bunch MuttonChops. I saw the four holes in the platform when I was putting away the blower and figured it couldn't be too hard. With the blowing and drifting snow, it might be a while.
She is trying to be an optimist though. "Terry, plug in the camper so I can use the Alde"
She is trying to be an optimist though. "Terry, plug in the camper so I can use the Alde"
Re: Attention all Spokane and Pacific NW T@D@ T@B and T@G enthusiasts monthly breakfast
When I was working, I always called it “work wake ups”. That seems like ions ago!
Re: profile question
@Verna... that’s because you’re priceless!!!!! 
Re: profile question
If I remember correctly, when it was still a Little Guy Forum, you used to be able to cash the points in for purchases at the Teardrop Shop. Hey nuCamp...will You let us do this too???? 
Re: profile question
@Homebodyatheart I wish. Although I’d opt for donuts I think.
Re: Comparison of Dimensions: 320 vs. 400
Verna said:The newest photo (not on the grass) doesn't look like the tires are tucked up into the wheel wells. Plus the axle is placed back further.
The photo from the t@b site does indeed look much better.
You are awesomely wise and observant.
I shall call you Yod@.
Re: Possible to remove 3163 thermocouple without pulling fridge?
Lol. I think it’s the same fridge. My photo is what you see if you remove 5 screws and take the panel on the left side off. It *looks* like you can just reach in from the front and access the area, no need to reach in thru the kitchen cabinet.Ratkity said:bimetalic, nope. I mean the housing. Layer was the only word that came to my mind.
There is a double housing. I managed to get the first housing off of it doing T@B yoga thru the sink panel. I have a bunch of magnetic tools and bendy ones.... imagine my vocabulary when MY frig had another housing over it and there was no way i could get to it. This doesn't mean your frig is the same. I had an early 2015 T@Bitha. My issue at the time was simple and thanks to this forum, I then knew to level everything.
The next issue was the grommet has a glass window in it. When I went to examine where the thermocouple existed, the grommet was NOT in it's designated spot. Geesh. Don't let it escape its hole!! I couldn't count the number of bruises on my arms and the body contortions and TIME it took to get it back in that itty bitty tiny hole. I did it though. My vocabulary went beyond sailor-ish by the time I was done. I think it was nearly 2 am. I used every trick to get a grommet in (special grease on one side, angle it went in, prayer, ancient rituals). I was considering a sacrifice at one point, but then I realized I'd already sacrificed a few back muscles. It finally popped in - sigh of relief.
Don't touch the grommet!!!
In any case I will continue my visual inspection when it gets a little warmer. There are reports out there about loose wires, bad connections, etc. so I’ll check all that first. Sacrificing a chicken under the full moon will come later.
Re: Idle-off-topic-chit chat - Part 2
Hey @Dalehelman, Just wanted to give a BIG thanks for installing the rear jacks for me at the Pot Luck gathering!
(P.S. A friendly reminder though...'ya don't need to leave your DNA on my trailer every time 'ya work on it...I KNOW where you live!
) 
(P.S. A friendly reminder though...'ya don't need to leave your DNA on my trailer every time 'ya work on it...I KNOW where you live!
)