Best Of
Re: Nucamp /Alde service in Colorado
Truma (now Alde's parent company) will also service Alde, check if there are Truma service centers in Colorado
Re: Nucamp /Alde service in Colorado
We're in Grand Junction and there isn't a NuCamp service center here. NuCamp referred us to Holiday RV in Poncha Springs. As jebjam said, Windish RV Center in Lakewood (just east of Simms on 6th Avenue) is an option. We're also at least 4 hours from either service center.
Re: 2018 T@B 320s replace nor cold with drawer frig and microwave any ideas. TIA
My 3-way on propane just went out. I am going the route of others with the Isotherm Cruise 65. Wanted the new Dometic NRX 60 but the depth was a little too deep.
Norcold N180.3 Replacement
Finally cried uncle and decided to replace the Norcold refrigerator in my T@b 320. A number of others have done so with the Isotherm C65 which fits and reports seem to say it works very well. I have done a lot of investigation to find if there were any alternatives even if I used a larger unit and used the storage space below the existing unit, but it seems the Isotherm C65 is as big as can be used. My only issue with the Isotherm is it's made in China which I am trying to avoid if at all possible.
I have identified the Narcold NR740BB (1.7 cu ft) and the Nova Kool R1900 (1.9 cu ft) which should fit without any issues and both or made in Canada I believe. The only other is the Vitrifrigo C62IXD4-F (2. cu ft) which is made in Italy and is very similar to the Isotherm in size and shape. I have reached out to Vitrifrigo to get more detail dimensioning since the published dimensions don't provide enough detail to make sure it will fit. The bigger the unit the less free air space around the unit for proper condenser cooling which is a concern. I haven't seen where anyone has used any of these non-China units in a T@b 320 only the Isotherm unit.
I am leaning towards the Vitrifrigo pending confirmation on the dimensions. Any suggestions are appreciated.
I have identified the Narcold NR740BB (1.7 cu ft) and the Nova Kool R1900 (1.9 cu ft) which should fit without any issues and both or made in Canada I believe. The only other is the Vitrifrigo C62IXD4-F (2. cu ft) which is made in Italy and is very similar to the Isotherm in size and shape. I have reached out to Vitrifrigo to get more detail dimensioning since the published dimensions don't provide enough detail to make sure it will fit. The bigger the unit the less free air space around the unit for proper condenser cooling which is a concern. I haven't seen where anyone has used any of these non-China units in a T@b 320 only the Isotherm unit.
I am leaning towards the Vitrifrigo pending confirmation on the dimensions. Any suggestions are appreciated.
Re: Norcold N180.3 Replacement
I purchased the Vitrifrigo C62IXD4-F which is 2.2 cu ft and in the process of installing it. About 95 percent finished with the installation as of today.
Although the compressor is made in China, the unit is made in Italy. I try very hard to avoid made in China if I can find a suitable alternative.
The quality of the Vitrifrigo is really nice. I ran it in my garage in 100+ degree weather and it performed very good.
My installation is unique in that it can use the existing side vents to cool the unit with the option of switching the cooling to the inside of the Tab 320s in cold weather to help heat the interior or if needed in hot weather when running the AC unit but based on the garage test mentioned above that may not be necessary.
When I finish the installation, I'll post some pictures in a new thread.
Although the compressor is made in China, the unit is made in Italy. I try very hard to avoid made in China if I can find a suitable alternative.
The quality of the Vitrifrigo is really nice. I ran it in my garage in 100+ degree weather and it performed very good.
My installation is unique in that it can use the existing side vents to cool the unit with the option of switching the cooling to the inside of the Tab 320s in cold weather to help heat the interior or if needed in hot weather when running the AC unit but based on the garage test mentioned above that may not be necessary.
When I finish the installation, I'll post some pictures in a new thread.
Re: Electric question
Thank you! There was indeed a blown fuse. I thought I had checked them all, but I missed it.
Re: Bug Fuzz
@lkc001 I do not know if anyone has been able to directly answer the question, because I (and others) were fortunate to obtain some from nuCamp. However, although I do not recall the source of the information, I previously copied and saved the below product link for future reference, so you might want to take a look and see if it will work for you:
TamBee 196.9 Inch Self-Adhesive Pile Weatherstrip for Windows & Doors 3/8-Inch x 3/8-Inch x 16.5 ft (3/8in*3/8in*16.5ft, Grey) - Amazon.com
TamBee 196.9 Inch Self-Adhesive Pile Weatherstrip for Windows & Doors 3/8-Inch x 3/8-Inch x 16.5 ft (3/8in*3/8in*16.5ft, Grey) - Amazon.com
Re: 2021 Tab 400 Boondock heavy tongue weight?
I always recommend to newbies or folks like you thinking of going bigger… rent. I was in your spot years ago. Though not with a 400 but Winnebago. I found a same model on RvShare and towed it 1400 miles to northern Ga for the test. I learned a lot through the reasonable cost of a weeks rental. Vice the cost of depreciation of a wrong Rv purchase.lkc001 said:I understand @GatorEgg —not really a deciding factor per se. I tow a Tab 320S now & tow with full water tank & extra weight on the tongue because it rides better. Have more than enough power & torque & tow in Colorado mountains. No issues at all & keep up with reasonable traffic speeds at no higher than 3500 rpm for short bursts with OD OFF. Have no need for any springs or WDH hitch now even at highway speeds wind or semis passing . The reason I am researching here & other places & asking feedback is because I have not towed a Trailer the size of the 400 with my Frontier—so I don’t know what I don’t know. it is rated for 6,300-6,500 # & has tow package. I’m asking & gathering info to decide between Sumo Springs or WDH. It appears to be a split between people’s preferences.GatorEgg said:400 tongue weights are all over the place. As said, check VIIN with NuCamp for specific. My 2022 tongue weight is 321#(weighed). IMO, If 100 lbs or so difference in tongue weight is a dividing factor then a different trailer or tow vehicle should be considered.
Re: Suspension on Tab 400 Boondock Edition
Something like this would be ideal.
Re: Post up some shots of your T@B set-up at the camp site! #3
Taking a midweek respite from heat wave and house repairs back home. 100 ft from ocean at Sunset Point Campground, Harrington ME.
A rare place with well separated spaces and many secluded sites. 60s (fog) and 70s on shore! 90s inland.
