Best Of
Re: Does anyone have experience replacing the coupler?
Move forward or back 1/2 “ - no more. It is best if the ball is in (nearly) contact with the front of the coupler.
Re: 2013 T@B considering selling
Get a quote from the dealership, then put on here for at least 1k higher . If it doesn't sell in a couple if weeks do the trade or take your time selling it.
Re: Considering a 2023 T@b 320 S standard
Welcome to the forum! Very nice people here and very knowledgeable.
We have a 2022 T@B 320 S. We have slept in just about every configuration in the short time we have had the camper. North/south (in other words front to back) with our heads under the cabinet (not good on the brain bucket), head toward the front, wheel to wheel, and twin configuration. Currently our favorite is the twin configuration. We have custom foam cushions that we use to extend the dinette seats out about 5" (each side) using the built in extension slats. This allows for a bed width of about 28", but also allows for a small aisle in between to use at night when nature calls. In my opinion, all of the other configurations require some type of "gymnastics" if you want to get out of bed during the night. Certainly some are better than others though. You will need to try it yourself and make the decision.
Scott
Re: Corrosion of Alde Convectors
Forgive me, I'm a newbie... I was reading through this awesome thread prepping for a fluid change and wondered if anyone had encountered "the bulges"... I found at least one bulging heater hose connection at each convector. Being an old auto mechanic I knew bulges are NOT a good thing. Upon diving in, as I always do, I discovered my fear was well-founded. I've tried to add a pic, hope it works. I've also contacted Alde Service and have started emailing with Truma/Alde on what to do. Just wondering if anyone else has run into this and what my future might hold.
Re: Has anybody got any info on 2023 T@B 400's ?
Our delivery for the 2023 tab 400 is set for delivery middle to end of September, really anxious to see the new re-designed dinette conversion, reconfigured bath, and overhead bunk area and how nuCamp is incorporating the hidden bunk. I am a huge fan of the Lagun table so that’s a plus. If anyone has any internet leads or photos of the new changes would be awesome to see! Otherwise waiting for dealer to provide the latest information, to date they don’t have!
Broken, worn out, or lost T@B window clip?
Those little gray T@B window clips wear out fast and are always popping off in the middle of the night, breaking, or disappearing. Replacements in North America are almost impossible to find.
Guess what I found actually holds better... a standard 1¼" medium binder clip available almost anywhere office supplies are sold.
They hold the day/night screens together tighter and if you use two on each window there is little to no chance the screen and shade will pull apart when adjusting them... and if you do drop one it's much easier to find in your bare feet...
Guess what I found actually holds better... a standard 1¼" medium binder clip available almost anywhere office supplies are sold.
They hold the day/night screens together tighter and if you use two on each window there is little to no chance the screen and shade will pull apart when adjusting them... and if you do drop one it's much easier to find in your bare feet...
A lifetime supply is under 10 bucks... https://amzn.to/3BdIEJl Not as pretty but they work better.
Re: Isn't this producing 24v?
@slick2699 ; Your Batteries are correctly connected in Parallel.
In fact the Go Power literature states they can not be connected in series. (perhaps because that will confuse the built-in BMS {battery management system})
You can tell the batteries are in Parallel because the Positive Terminals are connected (shorted) together.
The figure below is from the Go Power 'Quick Start' flyer.
In fact the Go Power literature states they can not be connected in series. (perhaps because that will confuse the built-in BMS {battery management system})
You can tell the batteries are in Parallel because the Positive Terminals are connected (shorted) together.
The figure below is from the Go Power 'Quick Start' flyer.
Re: Isn't this producing 24v?
Your photo shows batteries connected in parallel - positive to positive and negative to negative. As it should be. Series connection would involve a positive to negative connection between the batteries.
Re: Removable outdoor shower hose mod
@Sierra, that plastic fitting is a pipe thread to fit the disconnect on one end and barbed on the other. I’m pretty sure it was 1/2” barb, but can’t remember. I know that I stuck the hose end into boiling water to soften it up so it would slip over the barbed end. It was a very snug fit and probably wouldn’t have leaked even without the hose clamp. I was not worried about cutting the original hose since I knew I’d never use it again and is easily replaced if the need was there.
